Description
Here you have the possibility to create a test tape according to your specifications. Please enter all parameters like tape speed, magnetic flux and level, single frequencies and duration. You could also send us a wave file, which we would then record onto the tape. For this, please contact us before placing your order.
Tape speed:
9.5 cm/s (3.75 ips), 19.05 cm/s (7.5 ips), 38.1 cm/s (15 ips), 76.2 cm/s (30 ips)
Bandwidth:
6.3 mm
Track width:
Full-track
Equalization:
IEC 1 (CCIR), IEC 2 (NAB), IEC 2 (AES)
Reference level:
up to 514 nWb/m according to DIN or ANSI
Azimuth position:
90° ± 1′ at 19.05 cm/s (7.5 ips)
90° ± 3′ at 9.5 cm/s (3.75 ips)
Signals:
at 9.5 cm/s (3.75 ips) up to 10 kHz
at 19.05 cm/s (7.5 ips) up to 20 kHz
at 38.1 cm/s (15 ips) up to 22 kHz
at 76.2 cm/s (30 ips) up to 24 kHz
Flux level (relative to the reference value):
depending on tape speed and agreement
Frequency response:
± 1 %
Frequency response at 9.5 cm/s (3.75 ips):
31.5 – 4000 Hz < ± 0.1 dB
6300 – 8000 Hz < ± 0.6 dB
8000 Hz – 10000 Hz < ± 1.0 dB
Level deviations at 19.05 cm/s (7.5 ips) and above:
≤ 10 kHz ± 0.05 dB
≥ 12.5 kHz ± 0.1 dB
Duration:
up to 12 min. for all speeds up to 38.1 cm/s (15 ips)
up to 6 min. for 76.2 cm/s (30 ips)
Reel size:
22 cm (8.66″) or as agreed
General information:
Leader tape and trailer tape. Length 2 m (7 ft approx.) each. The signal starts approx. 5 seconds after the end of the leader tape.
